Hello, beautiful™

Safety precautions and ingredients

Important safety warnings for Radiant Cream Color, Root Reboot and Light Works

Permanent hair color contains ingredients which can cause an allergic reaction, which in rare cases can be severe.

Therefore, you must follow these precautions:

  • DO NOT use if:
    • You have already had a reaction to hair color product.
    • You have a sensitive, irritated, or damaged scalp.
    Conduct a skin allergy test 48 hours before each time you color (see below), even if you have already used coloring products before.
  • Temporary "black henna" tattoos may increase your risk of allergy to this product.
  • Avoid eye contact. In case of eye contact immediately flush with water. If you are wearing contact lenses, remove them before rinsing the eyes.
  • Use the gloves provided. Do not leave product on hair for longer time than recommended.
  • Rinse hair well after application.
  • This product is not intended to be used on children. Keep out of reach of children.

In case of reaction while coloring hair, such as a rash or burning sensation on the scalp, rinse immediately and discontinue use. Call a doctor if irritation persists. For any question relating to your individual sensitivities or specific allergies, consult a doctor. If swallowed, call a doctor or poison control center immediately.

CAUTION: This product contains ingredients that may cause skin irritation on certain individuals and a preliminary skin test according to accompanying directions should first be made. This product must not be used for dying eyelashes or eyebrows- TO DO SO MAY CAUSE BLINDNESS.

Read and follow the instructions which are included in the color kit carefully before use. Always consult your physician if you have questions or concerns.

Performing a sensitivity test for Radiant Cream Color

We always recommend you do a sensitivity test before coloring your hair, , even if you have already used this or other coloring products before. This test represents an important precaution. However, be aware that even if a sensitivity test has been carried out you may still experience an allergic reaction when you color your hair. The sensitivity test is not a guarantee of avoiding future allergic reactions. Always consult a doctor if you have any questions or concerns.

At least 48 hours beforehand, mix 1 part Cream Color (a small squeeze) with 1.5 parts Activator (a few drops). Use a cotton swab to apply a quarter-sized amount to a small patch of skin behind your ear or inside your elbow. Keep dry. Wait 48 hours. If there is no sign of change to the area, then you are ready to color.

Radiant Cream Color Ingredients

Color Activator:

Water, Hydrogen Peroxide, Cetearyl Alcohol, Sodium Laureth Sulfate, Propylene Glycol, Dimethicone, Oxyquinoline Sulfate, Pentasodium Pentate, Phosphoric Acid, Tetrasodium EDTA, Etidronic Acid.

Radiant Cream Color:

Water, stearyl alcohol, propylene glycol, ethanolamine, cetyl alcohol, ceteareth-25, cocamide MEA, ceteth-2, polyquaternium-6, argania spinosa kernel oil, hydrolyzed keratin, panax ginseng root extract, dimethicone, ascorbic acid, EDTA, sodium hydrosulfite, sodium sulfite, butylene glycol, toluene-2,5-diamine sulfate, palmitic acid.

Radiant Cream Color may contain some or all of the following:

2-methylresorcinol, m-aminophenol, 2, 4 diaminophenoxyethanol HCL, 4-chlororesorcinol, 2-amino-3-hydroxypyridine, p-aminophenol, 1-naphthol, 4-amino-2-hydroxytoluene, n,n-bis(2hydroxyethyl)-p-phenylenediamine sulfate, N-phenyl-p-phenylenediamine sulfate, 2-amino-4-hydroxyethylaminoanisole sulfate, p-methylaminophenol sulfate, 1-hydroxyethyl-4,5-diamino pyrazole sulfate, 5-amino-6-chloro-o-cresol, aminomethyl propanol, oleic acid.

Barrier Cream:

Water, Mineral Oil, Glycerin, Peg-40 Hydrogenated Castor Oil, PVP, Butylene Glycol, Cyclopentasiloxane, Argania Spinosa Kernel Oil, Sodium Lauroyl Sarcosinate, Dimethiconol, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Disodium EDTA, Phenoxyethanol, Ethylhexylglycerin, Sodium Hydroxide, Fragrance.

Cleansing Wipes:

Water, Isopropyl Alcohol, Ammonium Oleate, Sodium Lauroyl Glutamate, Benzyl Alcohol, Disodium EDTA, Fragrance.

Performing a sensitivity test for Root Reboot

We always recommend you do a sensitivity test before applying this product–at least 48 hours beforehand, even if you have already used this or other coloring products before. This test represents an important precaution. However, be aware that even if a sensitivity test has been carried out you may still experience an allergic reaction when you color your hair. The sensitivity test is not a guarantee of avoiding future allergic reactions. Always consult a doctor if you have any questions or concerns.

Dip one end of a cotton swab into the Liquid Color, fully saturating, and apply a quarter-sized amount to a small patch of skin behind your ear or inside your inner elbow. Dip the end of another cotton swab into the Color Activator tube, fully saturating. Apply to the same area of your skin where you applied the Liquid Color, and mix the two onto your skin. Keep dry. Wait 48 hours. If there is no sign of change to the area, then you are ready to color.

Root Reboot Ingredients

Color Activator:

Water, Hydrogen Peroxide, Acrylates/Ceteth-20 Itaconate Copolymer, Disodium EDTA, Etidronic Acid, Phosphoric Acid, Oxyquinoline Sulfate.

Root Reboot Liquid Color:

Propylene glycol, water, ethanolamine, laureth-2, peg-2 cocamine, toluene-2,5-diamine sulfate, oleth-4 phosphate, oleyl phosphate, cocamidopropyl betaine, panax ginseng root extract, argania spinose kernel oil, hydrolyzed keratin, hydrolyzed soy protein, panthenol, hydrolyzed corn protein, ascorbic acid, disodium EDTA, sodium metabisulfite, butylene glycol, sodium chloride, m-aminophenol, 2,4-diaminophenoxyethanol HCL, 4-amino-2-hydroxytoluene, 2-methylresorcinol.

Root Reboot liquid color may contain some or all of the following:

P-aminophenol, 2-amino-4-hydroxyethylaminoanisole sulfate.

Barrier Cream:

Water, Mineral Oil, Glycerin, Peg-40 Hydrogenated Castor Oil, PVP, Butylene Glycol, Cyclopentasiloxane, Argania Spinosa Kernel Oil, Sodium Lauroyl Sarcosinate, Dimethiconol, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Disodium EDTA, Phenoxyethanol, Ethylhexylglycerin, Sodium Hydroxide, Fragrance.

Cleansing Wipes:

Water, Isopropyl Alcohol, Ammonium Oleate, Sodium Lauroyl Glutamate, Benzyl Alcohol, Disodium EDTA, Fragrance.

Important safety warnings for Light Works

CAUTION: This product contains persulfates and other ingredients which may cause serious irritant and/or allergic reactions in some individuals.

THEREFORE, YOU MUST FOLLOW THESE PRECAUTIONS:

  • DO NOT USE if you have already had a reaction to bleaching your hair or a haircolor product, if you have a rash on your face, or if you have a sensitive, irritated, or damaged scalp.
    • Conduct a skin sensitivity test 48 hours before each time you color (see instructions), even if you have already used coloring products before.
    • Do not use if your hair has been processed with a hair straightener, relaxer, perm, or all-over bleach.
    • Do not use when the hair has previously been colored with henna or metal dyes.
    • Do not use on eyelashes, eyebrows or other facial hair.
    • Best used on hair sections that have not been previously bleached, including highlights or bleached Ombre.
    • Avoid contact with eyes, doing so may cause severe eye irritation and possible eye injury. In case of eye contact, immediately flush with water. If you are wearing contact lenses, remove them before rinsing the eyes.
    • Avoid contact with skin. If contact occurs, remove immediately with enclosed cleansing wipe or rinse with lukewarm water.
    • Remove all metal objects from hair before application. Do not use metal clips, bowls, combs, or other accessories to mix or apply product.
    • Brush hair lightly to remove tangles and hair styling residue before highlighting.
    • Place a towel around neck prior to application, and use the gloves provided.
    • Do not mix the components of this kit with any other product.
    • Do not apply mixture directly to scalp.
    • Do not cover hair or apply heat while product is on your hair.
    • Do not leave product on hair for longer time than recommended.
    • Rinse hair well after application.
    • Do not leave the mixture in a closed bottle (bottle may expand or burst). Do not keep any unused product.
    • Store and use at room temperature (50° to 80° F)
    • This product is not intended to be used on children. Keep out of reach of children.

In case of reaction, such as redness, burning, pain, or itching, rinse immediately and discontinue use. Call a doctor if irritation persists. Do not ingest. If swallowed, call a doctor, hospital, or poison control center immediately. Induce vomiting only if recommended by medical personnel.

CAUTION: This product contains ingredients that may cause skin irritation on certain individuals and a preliminary skin test according to accompanying directions should first be made. This product must not be used for dying eyelashes or eyebrows- TO DO SO MAY CAUSE BLINDNESS.

Read and follow the enclosed instructions carefully before use. Use only as directed.

Performing a Sensitivity Test for Light Works

We always recommend you do a sensitivity test before using Light Works™ Balayage Highlighting Kit. Perform a sensitivity test at least 48 hours before use, even if you have already used this or other coloring products before. This test represents an important precaution. However, be aware that even if a sensitivity test has been carried out, you may still experience an allergic reaction when you color your hair. The sensitivity test is not a guarantee of avoiding future allergic reactions. Always consult a doctor if you have any questions or concerns.

Using a plastic utensil, mix ½ teaspoon of Toning Glaze with ¾ teaspoon Toning Glaze Activator. Use a cotton swab to apply a quarter-sized amount to a small patch of skin behind your ear or inside your elbow. Keep dry. Wait 48 hours. If there is no sign or change to the area, then you are ready to color.

Performing a strand test for Light Works

  • Do a lightening preview test to determine the approximate timing required to reach your desired degree of lightness. This is particularly important if your hair has been previously chemically treated (see Important Safety Warnings).
  • Create a test strand by selecting a ¼ inch wide strand of hair from an underneath (underlying) section, and place an elastic band 2 inches from the root.
  • Put on the gloves provided in the kit, and use a plastic spoon and container to thoroughly mix ½ teaspoon of Lightening Cream with 1 teaspoon of Lightening Activator.
  • Apply the mixture to the entire strand, and start timing.
  • After 10 minutes, wipe the strand clean. If the hair strand is not light enough, re-apply the highlighting mixture and check it every 5 minutes until you achieve the desired results. (Total processing time should not exceed 60 minutes).
  • Rinse and dry the stand. Remember this time optimal time duration to use when processing Light Works.

Light Works Ingredients

Light Works Lightening Cream:

Ingredients: Potassium Persulfate, Paraffinum Liquidum (Mineral Oil), Sodium Persulfate, Sodium Metasilicate, Sodium Silicate, Ethylene/Propylene/Styrene Copolymer, Butylene/Ethylene/Styrene Copolymer, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, C12-15 Alkyl Benzoate, Magnesium Oxide, Kaolin, Hydrolyzed Keratin, Argania Spinosa Kernel Oil, Panax Ginseng Root Extract, Hydrolyzed Vegetable Protein Pg-propyl Silanetriol, Cera Alba, Ozokerite, Acrylates Copolymer, Silica, Lithium Magnesium Sodium Silicate, Disodium Edta, Butylene Glycol, Water, Linalool, Butylphenyl Methylpropional, Hexyl Cinnamal, Fragrance, Ci 77007.

Light Works Lightening Activator:

Ingredients: Water, Hydrogen Peroxide, Cetearyl Alcohol, Sodium Laureth Sulfate, Propylene Glycol, Dimethicone, Oxyquinoline Sulfate, Pentasodium Pentetate, Phosphoric Acid, Tetrasodium Edta, Etidronic Acid.

Light Works Bond Building Cleansing Treatment:

Ingredients: Water, Sodium Lauroyl Methyl Isethionate, Cocamidopropyl Betaine, Sodium Cocoyl Isethionate, Disodium Cocoamphodiacetate, Aloe Barbadensis Leaf Juice, Glycol Distearate, Peg-120 Methyl Glucose Dioleate, Hydroxypropylgluconamide, Keratin, Hydrolyzed Keratin, Panax Ginseng Root Extract, Argania Spinosa (Argan) Kernel Oil, Hydrolyzed Lupine Seed Extract, Hydrolyzed Rice Protein, Hydrolyzed Quinoa, Glycerin, Panthenol, Cocamidopropyl Hydroxysultaine, Guar Hydroxypropyltrimonium Chloride, Trideceth-12, Polyquaternium-10, Sodium Cocoyl Glutamate, Caprylhydroxamic Acid, Phenoxyethanol, Ethylhexylglycerin, Trimethylsiloxyamodimethicone, Hydroxypropylammonium Gluconate, C11-15 Pareth-7, Cocamidopropyl Dimethylamine, Butylene Glycol, Benzyl Alcohol, Sodium Chloride, Fragrance.

Cleansing Wipe:

Ingredients: Water, Isopropyl Alcohol, Glycerin, Polysorbate 20, Sodium Cocyl Glutamate, Sodium Lauryl Glutamate, Disodium Cocyl Glutamate, Tetrasodium Glutamate Diacetate, Ethylxexylglycerin, Phenoxyethanol, Fragrance.

Light Works Finish Toning Glaze:

Ingredients: Water, Glycol Cetearate, Propylene Glycol, Cocamide Mea, Cetyl Alcohol, Cocamidopropyl Betaine, Cetearyl Alcohol, Ceteareth-25, Ceteth-2, Hydrolyzed Keratin, Panax Ginseng Root Extract, Argania Spinosa Kernel Oil, Ethylhexyl Methoxycinnamate, Ethylhexylglycerin, Ethanolamine, Ascorbic Acid, Disodium Edta, Sodium Hydrosulfite, Sodium Metabisulfite, Butylene Glycol, Xanthan Gum, Phenoxyethanol, Toluene-2,5-diamine Sulfate, M-aminophenol, 2-methylresorcionol.

Light Works Finish Toning Glaze May Contain Some or All of the Following:

P-aminophenol, 2-amino-3-hydroxypyridine, 2,4-diaminophenoxyethanol, N, N-bis(2-hydroxyethyl)-p-phenylenediamine Sulfate, 4-amino-2- Hydroxytoluene, 2-amino-4-hydroxyethylaminnoanisole Sulfate.

Light Works Finish Toning Glaze Activator:

Ingredients: Water, Cetearyl Alcohol, Hydrogen Peroxide, Glycerin, Ceteareth-20, Oleth-4 Phosphate, Paraffinum Liquidum (Mineral Oil), Dimethicone, Etidronic Acid, Oxyquinoline Sulfate, Phosphoric Acid, Oleyl Phosphate, Disodium Edta.

Important safety warnings for Prime for Perfection

  • DO NOT USE IF YOU HAVE SENSITIVE, IRRITATED, OR DAMAGED SCALP.
    • Always perform a sensitivity test before use (see below)
    • Rinse hair well after application.
    • Avoid contact with eyes.
    • Use the gloves provided.
    • This product is not intended to be used on children. Keep out of reach of children.
    • For external use only.

In case of reaction while applying, such as a rash or burning sensation on the scalp, rinse immediately and discontinue use.

WARNING: This product contains ingredients which may cause eye irritation. If the product gets into your eye, flush immediately with a large amount of lukewarm water. If you wear contact lenses during application and any product gets into your eye, remove the contact lens first, then flush immediately with a large amount of lukewarm water. Call a doctor if irritation persists. If swallowed, get medical help or contact a poison control center right away- do not induce vomiting.

Prime for Perfection Color Ingredients

Prime for Perfection:

Water, Glyoxylic Acid, Hydroxyethylcellulose, Phenoxyethanol, Ethylhexylglycerin.

Performing a Sensitivity Test for Prime for Perfection

Before use, wash a small area inside of the elbow with soap and water and pat dry. Apply a small amount of Prime for Perfection on the area. Remove after 20 minutes with soap and water, or immediately if irritation occurs. If there is no sign of change to the area, you are ready to prime.

Madison Reed is transforming at home hair color with ammonia free hair color that results in multi-dimensional color that looks beautiful, healthy and natural. With a complete system of hair care products designed to work together, Madison Reed hair color is professional hair coloring at home.

×